Artist: rotten wood or metal rust spots

<p>Or may be rotten wood or metal rust spots, but also because of poor quality paint and peeling off. A small area of ​​paint peeling, can be used to polish paper, and then put on putty, brush on the primer, and then re-paint. Large area of ​​the shed must be stripped of all the paint, re-brushing. Paint blistering: the first bubble pierced, if the water emerge, that is, under <a href="http://woodmac-son.co.uk/green/174.html">outside patio flooring</a> the paint layer or behind the moisture infiltration, the sun a sun, the water evaporates into steam, it will paint top foam.</p><p> At this point, first with hot air gun to remove the starting paint, so that the natural dry wood, and <a href="http://woodmac-son.co.uk/green/173.html">pli dek technical advice</a> then brush on the primer, and finally in the entire repair surface to paint. If the bubble in the water, it may be cracked wood, there is a small amount of air, the sun a sun, air expansion, patent leather muster.</p><p> In the face of this situation, first scratch the foam of the patent leather, and then fill the cracks with resin filler, re-paint, or no filler, in the paint after the paint directly coated with microporous paint. There is a crack: this situation mostly use chemical paint or hot air gun to remove the paint, and then re-paint. If the range is not broken, then sand can be used sand or <a href="http://woodmac-son.co.uk/green/172.html">wpc pellets preparation</a> wet and dry sandpaper with water, grinding to break the paint, polished in the surface after the smooth, put on the putty, brush on the primer, and then paint.</p>